Essential tools for electrical work
Keep it at home for “Peace of mind in every repair job”
I believe that many homes may overlook having tools at home. They will realize the necessity when an electrical emergency occurs, whether it is a power outage, power outage, or short circuit. So, which electrical tools should be kept at home? Let’s take a look together.
1. Phillips screwdriver
A tool that should be kept at home because a screwdriver can be used to remove and install electrical equipment conveniently, such as plugs, switches, etc.2. Non-contact voltage tester
This tool is used to check if there is any residual voltage on the wires. If there is none, you can cut or connect the wires by placing it near the wires or power supply instead.
3. Tape measure
Almost every electrical job requires a tape measure. Tape measures are used to measure, for example, the height of various installation points, such as plugs, switches, or junction boxes to be installed, or to mark the location of the consumer unit, etc.
4. Electrical tape
Electrical tape is used to wrap damaged wires to prevent electrical leakage. It is usually made from heat-resistant plastic. Electrical insulation and waterproof. Choosing electrical tape can only be used to fix the initial situation. It is not recommended to use wires wrapped with tape for too long. If the wire is damaged, it is better to replace it as soon as possible.
5. Wire strippers
Or fishtail pliers are tools used to cut the insulation of the wire to break, leaving only the wire inside, which will be useful for stripping wires of different sizes.
6. Hammer
You will use a hammer to fasten and install various devices, whether it is installing a junction box to the wall frame or using a nail clip to lock the wire position after rewiring.
7. Voltmeter or multimeter
It is a tool used to check wires or devices before starting electrical work. Make sure that the wire or device has no current flowing through it. Or use it to check after electrical work, such as checking the circuit to see if it can work. Let the current flow through or not.
8. Flashlight
Electrical systems are often installed in dark corners of the house. Therefore, tools such as flashlights are very important to make work convenient and safe. The flashlight used can be a handheld or a headlamp type. But if it is better, it should be used together. To make it convenient to grab things and more flexible in working
Conclusion
All of these are basic electrician tools that are recommended to have at home. Be prepared to be safe, to handle the situation appropriately
One of the most important things about home electrical is to find standard electrical equipment that is necessary for various uses, designed and manufactured with quality in mind, including important equipment such as electrical control cabinets (consumer cabinets) and standard light bulbs for the safety of both the user and the installer.
