How high from the floor should switches and power outlets be installed?
Many people may have encountered the problem of installing switches and power outlets that are not suitable for their use, which may not be noticeable at first. However, after using them for a while, they will start to feel the inconvenience in using them, such as the switch being installed too high that they have to reach out, or the power outlet being installed too low that they have to bend down frequently, which makes it inconvenient to use and may cause accidents. In addition, the installation location is not consistent with the furniture decoration, such as when you buy an electrical appliance like a refrigerator, but the refrigerator's power cord is too short, and the power outlet is too high. When you plug it in to use the refrigerator, the power cord may be tight and cause the cord to break or cause the refrigerator to break in the future. Or even the power outlet is installed behind the cabinet or sofa, it may make it inconvenient to use or almost impossible to use.These problems may seem minor, but they cause many homeowners to waste time and money repairing them later. Therefore, planning the height of the switches and power outlets from the beginning is an important matter that should not be overlooked. Because it not only makes it more convenient to use, it also helps reduce problems and costs that may occur in the long run. In this article, LeKise will introduce the basic standards for the height of the installation of switches and power outlets, as follows
1. Electrical appliances placed on the floor
Air purifiers, lamps, fans, and power outlets should be approximately 30 cm above the floor. This distance is suitable for convenient plugging in and use without having to bend over too much, and helps prevent flooding and is safe from sweeping and cleaning.
2. Refrigerator power plugs
They should be installed at least 1.25 meters above the floor to prevent small children from sticking their fingers into the plug, which could lead to an electric shock. It also helps reduce tripping over power cords on the floor.
3. Switches and power outlets next to the door
Switches and power outlets next to the door should be approximately 100-130 cm above the floor, approximately 10 cm from the edge of the door. This distance allows for convenient use when walking in and out of the room, and also makes the wall look neat and uncluttered. As for light switches, there should not be more than 4-6 on/off switches together to prevent confusion.
4. Power outlets at the head of the bed
Power outlets for this area should be about 50-75 cm. from the floor and about 10 cm. from the edge of the bed. This allows for convenience in plugging in a phone charger or connecting a bedside lamp without worrying about the cord being too long.
5. Power outlets above the desk
For use at a desk, such as plugging in a computer or other electronic device, the power outlet should be installed approximately 85-90 cm above the floor, which is the appropriate level, allowing easy management of the power cord and reducing the risk of tripping.
For use at a desk, such as plugging in a computer or other electronic device, the power outlet should be installed approximately 85-90 cm above the floor, which is the appropriate level, allowing easy management of the power cord and reducing the risk of tripping.
In addition to considering the height of the switch and plug, another equally important thing is choosing the switch and plug, which affects safety and usage in the home or workplace.
Considerations when choosing a switch and plug
1. Safety standards
It is important not to overlook the selection of switches and plugs because they are devices directly related to the power supply. They should be certified to ensure that they have been tested and designed for safe use, reducing the risk of accidents that may occur from using electricity.
2. Non-flammable properties
The materials used to produce switches and plugs should have non-flammable properties, which reduces the risk of fire in the event of an electrical short circuit. If the materials used to produce switches and plugs cannot withstand heat well, it may cause a fire to spread quickly. Therefore, choosing materials that are resistant to high temperatures is very important to prevent fire hazards.
3. Strength and durability
Switches and plugs should be strong, resistant to frequent switching on and off or plugging and unplugging, and able to support long-term use without easy damage or rapid deterioration, such as disconnection or overheating from continuous use.
4. Safety curtains to prevent contact
Good electrical outlet design should have a safety shutter that prevents children or other unintended persons from directly touching the electrical terminals, such as plugging in the power plug with wet hands or touching the plug while it is in a dangerous condition. Installing a safety shutter will reduce the risk of electric shock.
5. Buy from a reliable company
Buying switches and power plugs from a reliable company with a reputation for electrical equipment is important to increase safety and efficiency in use. For example
Considerations when choosing a switch and plug
1. Safety standards
It is important not to overlook the selection of switches and plugs because they are devices directly related to the power supply. They should be certified to ensure that they have been tested and designed for safe use, reducing the risk of accidents that may occur from using electricity.
2. Non-flammable properties
The materials used to produce switches and plugs should have non-flammable properties, which reduces the risk of fire in the event of an electrical short circuit. If the materials used to produce switches and plugs cannot withstand heat well, it may cause a fire to spread quickly. Therefore, choosing materials that are resistant to high temperatures is very important to prevent fire hazards.
3. Strength and durability
Switches and plugs should be strong, resistant to frequent switching on and off or plugging and unplugging, and able to support long-term use without easy damage or rapid deterioration, such as disconnection or overheating from continuous use.
4. Safety curtains to prevent contact
Good electrical outlet design should have a safety shutter that prevents children or other unintended persons from directly touching the electrical terminals, such as plugging in the power plug with wet hands or touching the plug while it is in a dangerous condition. Installing a safety shutter will reduce the risk of electric shock.
5. Buy from a reliable company
Buying switches and power plugs from a reliable company with a reputation for electrical equipment is important to increase safety and efficiency in use. For example
LeKise's switches and plugs
Are a choice that meets the needs with complete features in terms of safety and quality. The switches and plugs are made of high-quality polycarbonate material, which is flame-retardant, which reduces the risk of fire. In addition, the plugs have safety curtains to prevent direct contact. And with a design that takes into account durability, it has been tested for opening and closing, so it can support long-term use.
Interested in the product, please contact us for more information via the following channels:
Register for My LeKise Rewards to receive benefits before anyone else
Line ID: @lekisegroup or https://page.line.me/lekisegroup
WhatsApp: LeKise https://wa.me/66954099280
.
Choose quality light bulbs. You must choose LeKise only.
LeKise, a light bulb factory that has been with Thais for more than 55 years
LeKise: Accepting distributors and OEM product production