LED solar street light. Lots of watts.
Bright for a long time. Save electricity bill.

          LeKise introduces the “LED solar street light” lamp, a solar street light. with brightness and motion sensors Helper to increase the light around the house or a walking street at night You don't have to pay for electricity because "LED solar street light" charges from solar energy. to convert into electrical energy that can illuminate the night even without the light of the sun Installed once, cost-effective, durable, can be used for a long time IP65 waterproof and dustproof, you can install it outside without worry.

feature
Operate by remote control with brightness and motion sensor function
at night The lamp will automatically turn on the brightness level of 20% and when motion is detected within 6-8 meters, the lamp will automatically adjust the brightness level to 100% and if no movement is detected for about 30 seconds, the lamp will adjust the brightness level. automatically come back to 20% to save energy.
The illumination duration is more than 12 hours* (if during the day the sunlight is less foggy or frequent rain There is dirt on the panel Maybe the panel can store less energy)

Watt option
Power 50 watts, white light, brightness 750 lumens.
Power 100 watts, white light, brightness 1500 lumens.

How to use the remote
- Turn off with OFF button
- Turn on with Auto-Dim button (20 % brightness level automatically)
- Turn on the light to 100% brightness for 2 hours with the 2H button, then return to Auto-Dim mode.
- Turn on the light to 100% brightness for 4 hours with the 4H button, after that it returns to Auto-Dim mode.
- Turn on the light to 100% brightness for 6 hours with the 6H button, after that it returns to Auto-Dim mode.
- Turn on 100% bright light mode, the lamp will light up at night until the battery runs out with the Full Bright button.

Instructions for use
- Solar street lamps should be installed in an area that receives sunlight all the time. to be able to use at least 12 hours
- Do not modify or use with non-standard equipment. or use more than specified in the product manual.
- Avoid areas with high heat or strong impact.
- Be careful not to break or damage the solar panel.
- Clean the solar panel when there is dust. for efficient operation of solar panels

Free : lamp post, steel anchor x 4, hex wrench, remote control With 2 x AAA batteries

installation method
1. Fix the pole with 4 steel anchor points on the desired installation location by choosing to install in the area where the sunlight shines.
2. Rotate the nut at all 4 points to remove the pillar lock from the product.
3. Attach the lamp to the pole with the pole lock with all 4 bolts.
4. Test the operation of the lamp. battery storage

Choose quality light bulbs You must choose to use Lekise only.
Lekise light bulb factory Living together with Thai people for more than 55 years

Special  Apply for My LeKise Rewards membership to receive discounts and receive benefits before anyone else.
You can contact us for information via the following channels.
Line ID : @lekisegroup or https://page.line.me/lekisegroup
LeKise : Accepting distributors and accepting OEM product production.