Glass street lamp International high quality street lamp factory price From Lekise, it comes with outstanding features made from high quality aluminum. Die-Cast molded and finished in a gray paint finish. High quality aluminum reflector designed for optimum light diffusion for street lighting. Lamp cover made of heat-resistant glass. Cover lock is made of high quality stainless steel, E40 lampholder can accommodate high pressure sodium lamps, has a degree of protection against water and dust. IP54/IP65 can be installed with a standard street lamp pole or branch of a 2-inch pipe with a 2-layer locking system, certified TIS 1955-2551 has been certified as a product manufactured in Thailand by the Federation of Thai Industries (Made In Thailand: MIT). The production process from the factory is under management according to the quality standard system ISO 9001: 2015 and ISO 14001. : 2015, guarantee the highest quality for 1 year

Many questions asked about Single end light bulbs, is it safe? Will it explode or not? Is it difficult to install? Today I will answer all questions. About single end lamps according to TIS standards. New and ready to test the safety to see clearly Within this clip If you finish watching, confirm that You will understand Single end bulbs more. All 3 types of single end have already been installed. You can see the installation of all 3 types at this clip.

Street lamps are intended to illuminate the road. And various traffic routes both in the city and in the countryside to reduce accidents and increase the safety of people traveling on the road. It is important to have light covering the entire road or area to be used because the right amount of light helps to see things correctly. If the light distribution is poorly placed, too much light can cause an accident. To those who travel on the road, therefore, the lighting design takes into account the appropriate light distribution pattern. Therefore, it is a good choice to check the preliminary before the actual installation that

LeKise Lighting creates new products. Along with developing and improving products regularly to build consumer confidence. Trust in Lekise's products, with every production process and quality inspection going through the Research & Development (R&D) team to control quality. Of raw materials before production, such as checking the size measurement of raw materials, checking the electronic part measurement, checking the operation of the electrical circuit board, checking the assembly of every step of the product, checking the quality after assembling the product and other inspections. Many more, each of which the inspection process There will be a different process depending on the product.

Why change to use a SINGLE END light bulb? I believe that many people are probably wondering, right? Lekise will tell you today. 5 reasons to switch to LED TUBE T8 - SINGLE END1. Prevent danger from electric shock2. for safe use according to TIS standards 2779 - 25623. No worries about wrong wiring. If installing a FUll lamp SET4. Easy to install with a starter 5. LED bulbs help you save more energy.

7 reasons why customers are confident in choosing products and services from Lekise ? 1. Value for money because we are a manufacturer and importer of complete lighting products. Products are ready to be shipped in a large storage warehouse. Complete with all styles as needed On an area of more than 80 rai 2. Variety of products Because we have a product research and development team. pay attention to every product design to support the needs of consumers And meet the needs in the market both in Thailand and abroad3. Assured product quality with product life testing process Test the luminosity of lamps and lanterns. With Lighting Laboratory testing room certified ISO17025:20174.

Have you ever? Each time you install or change a light bulb, you have to worry about the wires that you need to connect. ?And how to remove the old light bulb? or how to install ?That problem will go away. Just change to use LED MAGNET from Lekise. Installation process is as simple as 4 steps 1. Turn off the light switch every time. before replacing the bulb 2. Remove old bulbs, ballasts and starters3. Place the LED MAGNET bulb on the top of the lamp. and connect the wires to the connector 4. When the ceiling lamp cover is completed Try to turn on the light in just 4 steps, you can use the ceiling light without having to reconcile with the mechanic. Shop today. at all leading department stores across the country

Lekise offers services for the manufacture of steel light poles, street light poles, TISI height 9 meters or according to customer requirements. (Made-to-order) There is a consulting service from a team of engineers who are experts in Lekise's light poles. Products manufactured in Thailand are certified by the Federation of Thai Industries [Made in Thailand: MIT] with ISO9001: 2015, ISO14001: 2015 standards. , TIS. 2316-2549, testing standards from accredited institutions Etc. has works in both government sectors, private sectors and other organizations. To achieve the objectives of quality goals with excellent service to customers.

This kind of fire You need to look for a helper for changing the ceiling light bulb from Lekise! "Consume less power...but very bright" LED Magnet Nice model, size 44 watts, gives a maximum brightness of 4800 lumens with daylight white light (6800K), consumes only 44 watts only. LED Magnet Bright model There are 2 sizes to choose from, size 34 watts, providing a maximum brightness of 3600 lumens with Extra Daylight, white light (7000K), consuming only 34 watts of power, and size 42 watts providing a maximum brightness of 4600 lumens with Extra Daylight. White light (7000K) consumes only 42 watts of power.

Lekise Group has organized a CSR activity with a project called "Lekise gives light to the community". This project aims to provide light to the community area, whether it is a community center area. Or the roads used to travel within the village to be bright and safe in the community. This time, the company has brought the LED Solar Flood Light to the "Suan Som Farmer Housewives Group", Suan Som Subdistrict, Ban Paew District, Samut Sakhon Province for LED. The Solar Flood Light that is given to the community is a solar cell lamp that uses solar energy, so you don't have to worry about the electricity bill after installation, saving energy for the community as well.

Picked up the electricity bill almost fainted. Even though using the same power But the electricity bill has increased shockingly! Let LED SOLAR FLOODLIGHT help you. A lamp that gives more than a normal lamp. save you Pay only 0.- more than that, LED SOLAR FLOODLIGHT also has a quality test. Many steps before sending to customers as well

Electricity bills are getting more expensive in every house!! For Ft for the month of May-Aug. 23, increased to 0.9827 baht or 98.27 satang/unit from the original period of Jan.-Apr. 23, 93.43 satang/unit (excluding VAT). Causing many houses to face problems with expensive electricity bills, how good would it be if we had an assistant to help save electricity? Use the same electricity but pay less electricity bills. !! Lekise recommends LED Solar Flood Light, pays for electricity 0.- watts, less but very bright.